USB Battery Bank Keep Alive (Spare port)
USB Battery Bank Keep Alive (Spare port)
Regular price
$15.00 USD
Regular price
Sale price
$15.00 USD
Unit price
/
per
Overview:
This is meant to keep the USB Battery Bank from auto shut off. Usually happens when something you plug in is not drawing enough power. This will work to reset the timer on the bank by sending a pulse every so often to avoid it from going to sleep.
This unit is specifically to be used in an empty free USB port or can be soldered to on the free and open pads to be parallel in the circuit.
**NOTE: This is NOT a ghostbusters Haslab proton pack hack.***
Contents:
1 USB Keep Alive unit
(NO LEDs or Battery Bank included)
Instructions:
Find a free port and plug it in! If you plan to use it in-line just follow the printed polarity on the pads and solder right to it. Then apply heat shrink tubing to hold it together and provide wire strain relief.
Materials:
Fiberglass
IC chips
Metals
Size:
Overall Dimensions: 31.85mm x 12.32mm
Weight: < 1oz.
Materials: chip,circuit board
This is meant to keep the USB Battery Bank from auto shut off. Usually happens when something you plug in is not drawing enough power. This will work to reset the timer on the bank by sending a pulse every so often to avoid it from going to sleep.
This unit is specifically to be used in an empty free USB port or can be soldered to on the free and open pads to be parallel in the circuit.
**NOTE: This is NOT a ghostbusters Haslab proton pack hack.***
Contents:
1 USB Keep Alive unit
(NO LEDs or Battery Bank included)
Instructions:
Find a free port and plug it in! If you plan to use it in-line just follow the printed polarity on the pads and solder right to it. Then apply heat shrink tubing to hold it together and provide wire strain relief.
Materials:
Fiberglass
IC chips
Metals
Size:
Overall Dimensions: 31.85mm x 12.32mm
Weight: < 1oz.
Materials: chip,circuit board